Structural Repair & Maintenance

Repair & Maintenance

Repairing damage to reinforced concrete structures according to engineering principles, using modern technology and high-quality repair materials from Japan, to extend structural life sustainably. Our key reinforced concrete repair services include...

1. Crack Repair (Crack Repair)

For widths up to 0.30 mm (or at the designer's discretion), high-quality Epoxy Resin from Japan is used to bond the concrete, applied with Low Pressure Methods.

The Low Pressure Injection Method repairs concrete cracks at low pressure, allowing the material to penetrate deeply and spread evenly, reaching even very fine cracks down to 0.01 mm (Hair Crack). It restores structural strength without damaging the surface and is ideal for repairs that require high precision.

Crack Repair

2. Small-Area Section Repair (Small-Area Section Repair)

Deterioration of the concrete surface from various causes, with spalling that exposes the reinforcing steel and a damaged area no wider than 0.30–1.00 m (or at the designer's discretion). Rust may be found on the reinforcement, or the reinforcement may have lost cross-section. Repair is done by Patching with Modify Polymer Cement mixed with fiber.

Non-Shrink Patching Mortar is a non-shrink structural repair mortar that is easy to use and needs no formwork. It can be applied on vertical and overhead (Overhead) surfaces without falling off, up to 4 cm thick even against gravity, and achieves a high compressive strength of more than 600 ksc — ideal for repairing, filling and strengthening concrete with confidence and durability.

Small-Area Section Repair

3.Large-Area Section Repair
(Large- Area Section Repair)

Deterioration of the concrete surface from various causes, with spalling that exposes the reinforcing steel and a damaged area wider than 1.00 m (or at the designer's discretion). Rust may be found on the reinforcement, or the reinforcement may have lost cross-section. Repair is done by Grouting with Modify Polymer Cement (Non-Shrink Grout).

Non-Shrink Grout is a structural strengthening grout that does not shrink after hardening. It fills voids beneath structures completely, supports high loads and pressures, and adds strength and stability to construction work — ideal for foundations, machine bases and structures that require long-term precision and durability.

Large-Area Section Repair

Other Products & Services